Seite wählen

U and I cores

Cores made of the Kamafer materials K2004, K2006, K4000 are used for transformers in the frequency range from 10 to 500 kHz. The transferable powers are dependent on the core geometry. The possible upper frequency limits are predetermined by the material selected.

In addition to power transmission, UU and UI cores are also used in line transformers for producing the high voltage for electron beam deflection in picture tubes and in chokes. A new area of application is that of ignition transformers in the automotive industry.

The power materials used for manufacturing the transformer cores are characterized by high saturation flux density, low specific power losses and the decline in losses with increasing temperature in the temperature range from 20 to 100 °C, with a composition dependent minimum at about 80 °C.

The core sets are precision ground in pairs, thus providing a basis for the guarantee of the magnetic parameters. The AL values stated and the declared losses also only apply to the declared frequencies, excitations and test temperatures.

The UU and UI core geometry allows the machine winding and impregnation of high-voltage resistant coils. Assembly instructions including the joining procedure are supplied on request.

Type Drw. no. nominal AL-value / nH datasheet
K2004 K2006 K2008
U 13/5 1 600 650 PDF Icon
U 15/6,7 1 1250 1300 PDF Icon
U 20/7,5 1 1750 1800 PDF Icon
U 25/13 1 2350 2400 PDF Icon
U 46/28 1 5600 6000 PDF Icon
U 80/25 1 7500 8650 PDF Icon
U 93/16 1 2850 3250 PDF Icon
I 93/16/28 2 3900 4400 PDF Icon
U 93/20 1 3550 4100 PDF Icon
I 93/20/28 2 4900 5600 PDF Icon
U 93/30 1 5300 6000 PDF Icon
I 93/30/28 2 7350 8450 PDF Icon
U 100/25 1 4750 5200 PDF Icon
I 100/25 2 6000 7000 PDF Icon
U 126/20 1 3000 3200 PDF Icon
I 126/20 2 4000 4000 PDF Icon
U 130/25 1 6500 7500 PDF Icon
I 130/25 1 7400 8500

 

Drawing 1
Drawing 2

Kaschke Components GmbH • Kaschke Components GmbH • Rudolf-Winkel-Str. 6 • 37079 Göttingen • Telefon +49 551 5058 6 • Telefax +49 551 65756